Lenco Ls-570Ok Turntable With 4 Speakers Built-In And Bluetooth Reception

Sourced from

Product details

Product details Introducing the LS-570OK, a versatile turntable designed for exceptional sound quality and effortless setup. This stylish unit features an integrated, sophisticated four-speaker system that delivers a robust 80-watts (70-watt RMS) of sound, ensuring powerful audio without the need for external speakers. With Bluetooth 5.0 reception, you can wirelessly stream music from your smart devices, while the turntable's belt drive, Moving Magnetic Cartridge (MMC), and Start/Stop control provide smooth and accurate playback at both 33 and 45 RPM. The LS-570OK also includes a built-in pre-amplifier with an ON/OFF switch, allowing you the flexibility to connect to external audio systems. Supported by four sturdy wooden legs, the LS-570OK is easy to set upsimply attach the legs, and you're ready to go in seconds. With its crafted design and powerful built-in speakers, the LS-570OK is the perfect all-in-one solution for vinyl enthusiasts. Key features:Bluetooth 5.0 reception2 rated speed settings 33, and 45 RPM. Moving Magnetic Cartridge (MMC)Belt drive. Start & stop control4 built-in speakers. Output power: 80-watt (70-watt RMS)Pre-amplifier ON-OFF. Plastic dust cover. Included: 4 rubber feet and 4 wooden legs, CE-UK multiplug AC Adaptor, USB cable. Connections: RCA output, AUX in How to use Playing a Record1. Before playing a record1.1. Pull the protector straight forward to remove it. NoTE: Applying a downward force may cause the stylus to come off the body. Only low volume is output if the stylus has come off, or is about to come off, so refer to "Replacing the stylus" to reattach the stylus correctly.1. 2. Place the record on the felt mat so that the center hole aligns with the spindle. 2. Turntable Operation. Sufficiently lower the volume of the amplifier and speakers first. 2.1. Connect the included power adapter to the turntable, power on this unit by the power switch at the back side. Turn the power& volume knob to turn on this unit. The indicator will light in red. 2.2. Remove the stylus protector from the stylus. 2.3. Place the record on the slip mat. 2.4. Switch the function knob to choose 33 or 45 RPM speeds according to the type of record. 2.5. Unlock the tonearm clip and set the tonearm lift lever to the up position. 2.6. Position the tonearm over the desired location (groove) on the record. The platter will start turning automatically. 2.7. Carefully lower the tonearm on the record by setting the tonearm lift lever to the down position. 2.8. Turn up the volume of the turntable as needed. 2.9. When you are finished playing the record, raise the tonearm, return it to rest on the arm clip and press the ON/OFF switch at the back side to turn off the turntable. 2.10. The platter will stop turning if there is no sound output from the speakers in 3 minutes. Get the tonearm back to the arm rest and repeat the process 2.6 if you want to play the record again. Hazards and Cautions Please refer to attached user guide.